Click to enlarge
Previous product
End Cap $0.00 – $15.92
Back to products
Next product
Heat Pump Y-Branch Pipe Kit $0.00
Category:

Branch Selector Box Kit

These kits provide the necessary couplings, reducers, and/or caps to connect VRF Branch Selector Boxes to outdoor unit piping and indoor unit piping. Each kit is custom built to match the project system selection lay-out as provided by the customer. The couplings, reducers, flare tube kits, or closed pipe caps are shipped loose for field installation on to the selector box.

Specialty tube support adaptor inserts may be supplied with the kit for proper fit onto certain selector box connecting pipe.

Contact RCS customer service team for more details on tube inserts for your selected equipment. Refer to RCS installation instructions for details prior to installing these fittings.

APPLICATION

High Pressure HVAC/R

MAX RATED PRESSURE

1167 psi (80 bar)

COMPATIBLE TUBING

Seamless Copper Tubing, Drawn H58, Light Drawn H55, or Annealed O60 made to ASTM B280 and ASTM B75 Standard.

AGENCY APPROVED

ETL Listed 5011885. Conforms to UL 207 STD. Certified to CSA STD C22.2#140.3

REFRIGERANTS

All CFC, HCFC, HFC, HFO, and class A2L refrigerants and refrigeration oils.

The product is suitable for use with R744 (CO2) when used within the design pressure rating.

The product is not suitable for use with ammonia, methyl chloride, hazardous or flammable refrigerants from Group 2 or 3 per ASHRAE 15.

INSTALLATION

The fittings must be installed per RCS installation instructions by skilled installers, trained specifically in the application and installation of RCS fittings.

Contact RCS, Inc. for alternative tube support inserts when installing fittings on annealed copper coils or pre-insulated line sets with tube wall thicknesses less than specified by ASTM B280. Do not use on annealed copper sizes larger than 5/8” O.D.

WARNING

All equipment manufacturers’ installation restrictions must be strictly followed. The use of RCS flame-free mechanically attached fittings does not relief the installer from following the equipment manufacturers installation requirements.

Except for factory male flare ends, all factory swaged-ends must be cut off the Selector Box to provide for actual line size in order to install RCS flame-free mechanically attached fittings.

A minimum of 3 ⅛ inches of straight tube clearance from the selector box bulkhead and 1 ⅝ inch clearance between adjacent tubes are required to engage the press tool.

DATA SHEET

Click to download

INSTRUCTIONS (CLICK HERE)

Add to Wishlist
Compare
SINGLE PORTMULTI-PORT --------->>--------->>
SBXXX01P36SBXXX02PSBXXX08P
SBXXX01P48SBXXX03PSBXXX10P
SBXXX01P60SBXXX04PSBXXX12P
SBXXX01P96SBXXX06P
Description

Cubilia vestibulum interdum nisl a parturient a auctor vestibulum taciti vel bibendum tempor adipiscing suspendisse posuere libero penatibus lorem at interdum tristique iaculis redosan condimentum a ac rutrum mollis consectetur. Aenean nascetur vehicula egestas a adipiscing a est egestas suspendisse parturient diam adipiscing mattis elementum velit pulvinar suscipit sagittis facilisis facilisi tortor morbi at aliquam.

Netus nisi volutpat donec condimentum nunc eu sem odio condimentum hendrerit nisl mollis scelerisque ad vitae a eu.

Etiam dictumst congue a non class risus sed a. Diam adipiscing a condimentum in a nisl a maecenas libero pharetra tincidunt phasellus justo molestie bibendum. Vestibulum penatibus vestibulum lobortis vehicula euismod a platea taciti a eget in nec cum eget curabitur justo id enim mi velit at cum. Eu amet ut elit a sociis himenaeos eros nunc at pharetra magna suscipit.

SAGITTIS MALESUAD

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

LITORA PARTURIENT

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

NISI VOLUTPAT

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

TRISTIQUE IACULIS

Ridiculus facilisi condimentum ridiculus tristique nostra litora parturient risus

Additional information
Select a Kit

SBDKT01P36, SBDKT01P60, SBDKT01P96, SBDKT04P, SBDKT06P, SBDKT08P, SBDKT10P, SBDKT12P
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Branch Selector Box Kit”
Shipping & Delivery
wood-portfolio-placeholder
wood-gallery-placeholder-4

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.