Click to enlarge
Previous product
Tool - Battery Charger 115V for 18V Li-Ion Battery - Makita $250.00
Back to products
Next product
Copper Tubing $0.00
Category:

Cold Shrink Protective Sleeves

APPLICATION

The CS92 Cold Shrink Protective Sleeve is an open ended silicone rubber sleeve pre-expanded and assembled onto a plastic removable core. The plastic core is removed when the sleeve is positioned for installation over an RCS mechanically attached fitting. Silicone Cold Shrink is used to protect the steel collars used on RCS fittings from moisture when installed under thermal insulation.

This cold shrink tube is recommended for all RCS fittings installed on insulated piping located outdoors and on all RCS fittings used at the piping connection to VRF outdoor units.

These sleeves should also be installed on RCS fittings wherever the piping insulation cannot be installed per the insulation manufacturer’s instructions.

INSTALLATION

  1. Locate the plastic core pull strip on the cold shrink and note the pull direction orientation.
  2. IMPORTANT: Slide the Cold Shrink sleeve onto the tubing section to be joined before installing the RCS mechanically attached fittings. Make sure that adequate space is available to remove the plastic core in later step.
  3. Install the RCS fitting per the detailed installation instructions.
  4. After pressure and leak testing has shown the fitting joint to be acceptable, center the Cold Shrink sleeve on the fitting to be covered.
  5. Pull the plastic strip slowly in the direction labeled on the Cold Shrink sleeve and allow the rubber sleeve on the opposite end to shrink onto the tube at the predetermined position on the copper tube.
  6. After the rubber sleeve takes firm hold of the tube, continue to pull the strip smoothly till the entire plastic core is removed and the rubber sleeve is in complete contact with the copper tube and the enclosed fitting.
  7. Insulate the piping system as required following the insulation manufacturer’s detailed instructions

DATA SHEET

Click to download

INSTRUCTIONS (CLICK HERE)

 

Add to Wishlist
Compare
FITTING RANGE Inches (mm) PART NUMBER LENGTH inches (mm) DIAMETER Inches (mm)OD Maximum Inches (mm)OD Minimum Inches (mm)THICKNESS After Shrinkage Inches (mm)
5/8” to 1/4”CS92-05025.5 (140)0.98 (25)0.83 (21.0)0.25 (6.3)0.10 (2.5)
3/4” to 3/8”CS92-06036.3 (160)1.18 (30)0.98 (25.0)0.34 (9.1)0.10 (2.5)
7/8” to 1/2”CS92-07047.1 (180)1.38 (35)1.19 (30.1)0.41 (10.4)0.10 (2.5)
1-1/8” to 1/2”CS92-09047.9 (200)1.77 (45)1.57 (40.0)0.50 (12.7)0.12 (3.0)
1-5/8” to 7/8”CS92-13079.8(250)2.36 (60)2.09 (53.0)0.72 (18.2)0.12 (3.0)

Installation

The fittings are for professional use only and must be installed per RCS instructions by skilled, trained,
and qualified refrigerant piping system technicians.

Description

MAECENAS IACULIS

Nunc per mollis pot enti amet imperdiet blandit dis eu sociosqu accumsan dap ibus ultricies tristique montes a deros adipiscing a justo. Aliquet mus a aptent ullamcorper metus accumsan. Habitasse a purus nec ipsum a urna ac ullamcorper varius metus blandit posuere.

Consectetur parturient ad imperdiet torquent dui dis eu sociosqu accumsan accumsan dapibus ultricies. Maecenas iaculis viverra tellus ridiculus a sed vestibulum dapibur.

FEUGIAT PARTURIENT

Venenatis duis tristique accumsan netus enim in posuere torquent ut ullamcorper integer aliquam a mi curae elementum. Maecenas iaculis viverra tellus ridiculus a sed vestibulum dapibus. Ante a mollis habitant duis urna cum iaculis ullamcorper luctus.

  • 65% Polyester, 23% Elastane
  • Abitur parturient praesent ipsu
  • Minceptos pri 187cm/3’1.3″ tall
  • Diam parturient dictumst nibh mu

FEUGIAT PARTURIENT

Model’s height: 4’2.2”/184 cm
Model is wearing: Size Large

ALIQUET

Quam suspendisse adipiscing quis pretium nostra cubilia tristique nam non ac placerat nascetur a vel.

CURABITUR VELIT

Main: 76% Polyester, 24% Elastane.

Additional information
Select a Size

Cold Shrink Tube for 5/8 to 1/4 In Fittings (5 Pack), Cold Shrink Tube for 3/4 to 3/8 In Fittings (5 Pack), Cold Shrink Tube for 7/8 to 1/2 In Fittings (5 Pack), Cold Shrink Tube for 1 1/8 to 1/2 In Fittings (5 Pack), Cold Shrink Tube for 1 5/8 to In 7/8 In Fittings (5 Pack)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Cold Shrink Protective Sleeves”
Shipping & Delivery
wood-portfolio-placeholder
wood-gallery-placeholder-4

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.